A promising breakthrough: Nanocrystals made of amalgam

Researchers at ETH have managed to produce nanocrystals made of two different metals using an amalgamation process whereby a liquid metal penetrates a solid one. This new and surprisingly intuitive technique makes it possible to produce a vast array of intermetallic nanocrystals with tailored properties for diverse applications. 

Intermetallic nanocrystals (electron microscope images) made from different combinations of metals. The white bar indicates 10 nanometres. (Images: Chemistry and Materials Design group)
Intermetallic nanocrystals (electron microscope images) made from different combinations of metals. The white bar indicates 10 nanometres. (Images: Chemistry and Materials Design group)

Nanocrystals are nanometre-sized spheres consisting of regularly arranged atoms. Owing to their advantageous properties, they are on the rise in several technologies. Semiconductor nanocrystals, for instance, are used in new generation television screens. More recently, so-called intermetallic nanocrystals, in which two different metals combine to form a crystal lattice, have made a name for themselves as they promise improved and unique applications. Those applications range from catalysis to data storage and medicine.

In theory, there are tens of thousands of possible combinations of metals that could make up such nanocrystals, with a correspondingly large number of different material properties. So far, however, it has only been possible to make nanocrystals out of a few such pairings. A team of researchers at ETH Zurich led by Maksym Yarema and Vanessa Wood at the Institute for Electronics have now developed a new technique that, in principle, allows one to realize nearly all possible combinations of intermetallic nanocrystals. Their results were recently published in the scientific journal Science Advances.

Surprisingly intuitive method

“Our method is simple and intuitive – so intuitive, in fact, that we were surprised that no one had had this idea before us”, says Yarema. In conventional procedures for producing nanocrystals made of a single metal, the metal atoms are introduced in molecular form, for instance as salts, into a solution in which the nanocrystals then form. “Theoretically that can also be done with two different metals, but in practice it is difficult, or even impossible, to combine distinctly dissimilar metals in the reactor”, Yarema explains. Therefore, the ETH scientists resorted to a procedure that has been used for centuries: amalgamation, a particular kind of fusing or blending metals.

Liquid metals

Amalgams are particularly well-known from dentistry, where they are used as a filling material, and also from gold mining. In both cases, liquid mercury is added to dissolve other metals (for tooth fillings, a mixture of copper, zinc and silver). However, amalgamation also works with any other liquid metal. Besides mercury, which is liquid even at room temperature, there are a number of metals with relatively low melting points, such as gallium (30 degrees centigrade), indium (157 degrees) or tin (232 degrees).

Amalgamation approach for nanocrystals

Yarema and his colleagues use the amalgamation approach at the nanoscale. The reaction starts with the dispersion of nanocrystals containing a single metal, for instance silver. Then, the atoms of the second metal – say, gallium – are added in molecular form (in this case as amides, a compound of carbon, hydrogen, and nitrogen), while the mixture is heated to around 300 degrees.

We are amazed how efficient the amalgamation is at the nanoscale. Having one liquid metal component is the key to fast and uniform alloying within each nanocrystal.Maksym Yarema
Maksym Yarema

Initially, the high temperature causes the chemical bonds in the gallium-amide to break up, allowing liquid gallium to accumulate on the silver nanocrystals. Now, the actual amalgamation process begins, during which liquid gallium creeps into the solid silver. Over time a new crystal lattice is formed, in which eventually silver and gallium atoms are regularly arranged. Then everything is cooled down again, and after ten minutes the nanocrystals are ready. “We are amazed how efficient the amalgamation is at the nanoscale. Having one liquid metal component is the key to fast and uniform alloying within each nanocrystal,” says Yarema.   

Controllable process  

Using the same technique, the researchers have already produced different intermetallic nanocrystals such as gold-gallium, copper-gallium and palladium-zinc. The amalgamation process itself can be precisely steered. Through the number of secondary atoms, introduced into the solution as amides, the proportion of the metals in the nanocrystals can be accurately controlled. Taking the example of gold-gallium (chemical symbols Au and Ga), the researchers have shown that in this way nanocrystals with very different proportions can be produced, such as 1:2 (AuGa2), 1:1 (AuGa) or 7:2 (Au7Ga2). The size of the final intermetallic nanocrystals can also be predicted precisely from the size of the initial nanocrystals and the increase in size due to the second metal.   

Tailored nanocrystals for applications  

The researchers anticipate great potential for technological applications due to the exact controllability of the composition and size of the nanocrystals together with the possibility to combine the metals almost at will. “Because the amalgamation synthesis of nanocrystals enables so many new compositions, we cannot wait to see them at work in improved catalysis, plasmonics or lithium-ion batteries”, says Yarema. Catalysts made of nanocrystals, for instance, can be precisely tailored and optimized for a particular chemical process which they are supposed to accelerate.

Enlarged view: The production process of an intermetallic nanocrystal (upper row: schematic, lower row: electron microscope images). To the solution containing nanocrystals of the first material (left), the second metal (“M”) is added as an amide and subsequently accumulates as a liquid on the nanocrystals (centre). Amalgamation finally results in intermetallic nanocrystals (right). (Images: CMD)
The production process of an intermetallic nanocrystal (upper row: schematic, lower row: electron microscope images). To the solution containing nanocrystals of the first material (left), the second metal (“M”) is added as an amide and subsequently accumulates as a liquid on the nanocrystals (centre). Amalgamation finally results in intermetallic nanocrystals (right). (Images: CMD)

Reference

Clarysse, J, Moser, A, Yarema, O, Wood V, Yarema M. Size- and composition-controlled intermetallic nanocrystals via amalgamation seeded growth. Science Advances, 28 Jul 2021, Vol. 7, no. 31, eabg1934. DOI: external page 10.1126/sciadv.abg1934 .

JavaScript has been disabled in your browser